Industrias: Plásticos
|
Insert Molding & In-Mold Labeling (IML) |
Insert
Molding and In-Mold Labeling are two of the most
difficult tasks for either an operator or an EOAT to
perform.
Insert Molding is the
process of placing small parts into a mold that then
become part of the finished product. The robot must be
able to assure proper placement and alignment of the
inserts. Our experience designing EOAT for insert
placement have made the process second nature to us,
regardless of complexity or size.
|
|
 IML is the process of placing labels into the mold
so that they become part of the finished product. We
have developed and patented a process for IML that
does not require mechanical gripping of the label by
the tool or in the mold, leaving a much cleaner
surface on the finished part.
IML
processes are increasingly popular because of their
labor saving benefits. But equally important is their
ability to produce a better part - with more
accurately placed labels that adhere permanently.
 Advantages of In-Mold
Labeling
- Robot handles the
process
- Accurate label
placement
- Reduced waste
- Constant cycle times
- Label becomes part
of the finished part - does not rely on adhesive
- No edge to peel back
for fingers to remove.
The >SAS< patented
(U.S. P at. #6,416,706) Insert Mold System can be
applied to other parts including metal inserts, cloth,
and vinyl. Our EOAT makes your parts better with
accurate placement of a permanent label at less cost
with reduced waste and labor.
 Recientemente
sas introdujo estos pines para insertos en moldes
(iml)
Ademas de una contar
con alta precisiona, las aplicaciones en insertos para
moldes a menudo realizan varias operaciones al mismo
tiempo. Los pines de acoplamiento proporcionan la
seguridad necesaria en las aplicaciones complejas y
con baja tolerancia.
Características
importantes:
- Proporciona precisión de +/-.001”
- Ajustado para su herramienta de fin de brazo, el
robot y el molde
- Los pines se pueden acoplar en
localizadores del molde
- Longitudes personalizadas, formas y diámetros
disponibles.
|
